Installation & Assembly

ManualsBrandsAugust Grove ManualsEntry & Mudroom FurnitureMedau Hall Tree

BASE UNIT PART LIST

HARDWARE LIST

Hex Wrench

1 pc.

Wood Plug

8 pcs. (+1 Extra)

Wood Screw

(for Spring Support)

8 pcs.(+1 Extra)

Head Cap Bolt

(long)

8 pcs.(+1 Extra)

Seat

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Base

1 pc.

Front Panel

1 pc.

Back Panel

1 pc.

Cross Dowel

8 pcs.(+2 Extra)

Spring Support

2 pcs.

Head Cap Bolt

(short)

4 pcs.(+ 1 Extra)

Hall Tree Storage Bench

Thai Patent Pending

Dear Our Valuable Customers,

Please follow our assembly instructions in every step,

we guarantee that you will get the perfect merchandise.

Thank you so much for purchasing our quality products.

Tools Required For Assembly : Philips screwdriver

Summary of content (5 pages)

PAGE 1
Hall Tree Storage Bench Dear Our Valuable Customers, Please follow our assembly instructions in every step, we guarantee that you will get the perfect merchandise. Thank you so much for purchasing our quality products. Thai Patent Pending BASE UNIT PART LIST A. Seat 1 pc. B. Side Panel 1 pc. C. Side Panel 1 pc. E. Back Panel 1 pc. D. Front Panel 1 pc. F. Base 1 pc. HARDWARE LIST Head Cap Bolt (short) 4 pcs.(+ 1 Extra) Hex Wrench 1 pc. Head Cap Bolt (long) 8 pcs.
PAGE 2
Assembly Instructions IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. Head Cap Bolt (long) Cross Dowel Assembly Cross Dowel E STEP 1 Insert Cross Dowels into the holes of Front Panel (D) and Back Panel (E). Cross Dowel B Attach the Side Panel (B) and (C) to the Front Panel and Back Panel with Head Cap Bolts.
PAGE 3
Hall Tree Storage Bench Dear Our Valuable Customers, Please follow our assembly instructions in every step, we guarantee that you will get the perfect merchandise. Thank you so much for purchasing our quality products. Thai Patent Pending TOP UNIT PART LIST G. Top 1 pc. I. Side Panel 1 pc. H. Side Panel 1 pc. J. Upper Back Frame 1 pc. K. Lower Back Frame 1 pc. L. Back Stretcher 2 pcs. N. Arm 1 pc. M. Arm 1 pc. HARDWARE LIST Hex Wrench 1 pc. Head Cap Bolt (short) 4 pcs.
PAGE 4
Assembly Instructions 2/3 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. STEP 1 Hook Assembly J Attach the Hooks to the Upper Back Frame (J) with Wood Screws. L J K L STEP 2 Assemble the Back Stretcher (L), Upper Back Frame (J) and Lower Back Frame (K).
PAGE 5
Assembly Instructions 3/3 Head Cap Bolt (long) M H G N Head Cap Bolt (long) I STEP 4 Attach the Top (G) to the Side Panel (H) and (I) with Head Cap Bolts as shown. Attach the Arm (M) and (N) to the Side Panels with Head Cap Bolts. STEP 5 Place the Top Unit on the Base Unit. Tighten up all the Head Cap Bolts.