Installation & Assembly

PAGE 1
Parts List BED CARTON HEADBOARD CARTON (10) HEADBOARD PANEL {10) HEADBOARD PANEL {11) FOOT BOARD PANEL HARDWARE BAG FOR BED HARDWARE BAG FOR ATTACHMENT TO FRAME HEADBOARD ATTACHMENT TO FRAME {1) 2 1/4" COUNTER SUNK ALLEN HEAD SCREW-4 (2) 1" FLAT ALLEN HEAD SCREW-4 (3) HEX NUT {4) 5/6" OD FLAT WASHER-8 (5) ALLEN WRENCH (6) PLASTIC GLIDE (1) FINAL (8) FOOT CASTING-2 (6) LEG EXTENSION-2 (1) 2 1/4” GAUNTER SUNK ALLEN HEAD SCREW-4 (3) HEX NUT-4 {4) 5/2° OD FLAT WASHER (5) ALLEN WRENCH {6) PLASTIC GLIDE-2 (1) FIN
PAGE 2
Instruction Sheet SAVE ALL PACKAGING MATERIALS UNTIL PRODUCT IS FULLY ASSEMBLED. HARDWARE AND SMALL PIECES MAY NOT BE SEEN AND BE ACCIDENTALLY DISCARDED WITH PACKAGING MATERIALS. FIGURE 1 FIGURE 2 FIGURE 3 { ® Align’ top reduction of extension legs (3) with bottom of headboard posts. (See Figure 1) Make sure the 3 holes on extension legs crs perpendicular to headboard peel. o Now carefully insert extension legs (9) into bottom of headboard (10) posts.