Assembly Instructions

ASSEMBLY RA TING

Tools Required For Assembly:





  

 



Allen Wrench

Wrench

(Included) �

(Included)







� � �

Page 1 of 5

PAGE 1
Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
PAGE 2
PAGE 3
PAGE 4
1. Prepare 3 bolt assemblies by first inserting a lock washer (#D) onto the bolt (#A) then a flat washer (#C) onto that same bolt (#A). 2. Place the backrest (#1) onto a protected surface, then align the seat (#2). Insert the bolt assemblies into the center holes and secure using the Allen wrench (#E). 1. Prepare 4 bolt assemblies by first inserting a lock washer (#D) onto the bolt (#B) then a flat washer (#C) onto that same bolt (#B). 2.
PAGE 5
1. Insert the threaded ends of the front legs (#3) into the front corners of the seat (#2), make sure to insert the leg supports (#4,5) into the slots as you align the front legs. 2. Apply a flat washer (#G), lock washer (#H), and hex nut (#F) onto each threaded end in that order. Secure using the wrench (#I).