User Manual
8 ©2023 Augmented Vision Labs, LLC
LENS INSERTION
1. Place your head directly over the lens, making sure that it is level with the surface
that the base was placed on. Your chin should be tucked in toward your chest.
2. Use both hands to firmly hold your upper and lower eyelids open.
a. Tip: Placing your finger as close as possible to your eyelashes (without
touching your eyelashes) will give you the best grip on your eyelids.
3. Keep both eyes open and slowly move your head down toward the lens until
your eye makes contact with the lens.
a. Tip: Focus on the light as you move closer to the lens. The light will look
perfectly round if you are lined up with the center of the lens. If the light
does not look round, you will need to adjust the position of your head until
it does.