Manualshelf

User Manual

ManualsBrandsAUGMENTED VISION LABS ManualsInsertion SystemAUGMENTED VISION LABS S5 Mini Hybrid Lens Insertion System
12345678910
6 ©2023 Augmented Vision Labs, LLC
INSTRUCTIONS FOR USE
BEFORE LENS INSERTION
1. Place the suction base on a smooth, flat surface. Ensure that both the bottom of
the suction base and the surface are clean and dry.
2. Hold down the outer edge of the suction base while pulling the light unit upward
until the device locks into place in the vertical position. This will engage the
suction of the base.
3. Connect the rubber lens holder to the top of the light unit.
Step 2
Step 3