User Manual

7. Cover one eye at a time to see if you can notice any air bubbles that may be

trapped under the lens. It may be helpful to use a mirror and a flashlight to check

for air bubbles.

a. If air bubbles are seen, you must remove the lens and re-insert it.

AFTER LENS INSERTION

1. Remove the rubber lens holder from the light unit.

2. Dry off the outside of the light unit and base with a paper towel.

3. Detach the S5 Mini™ from the mounting surface:

a. Push the light unit back to the horizontal position to break the suction

of the base.

i. If the suction doesn’t release right away, it may be necessary to

use a fingernail or a business card to separate the edge of the

base from the surface that it is suctioned to.

b. Use a paper towel to dry off any remaining moisture on the base.

Please carefully follow the instructions below to keep liquid away

from the electronics of your device. Following these instructions will

extend the operational life of your device.