User Manual

8 ©2023 Augmented Vision Labs, LLC
10. Inspect your lens to make sure it is clean and free of damage then place it on the
rubber lens holder.
a. It’s recommended to rinse your lens with preservative free saline if it was
previously stored in a multi-purpose cleaning solution.
11. Fill the lens bowl with a preservative-free saline solution that is approved by
your doctor.
a. Add saline until the level rises above the edge of the lens.
12. Twist the top half of the light unit counterclockwise to activate the light.
LENS INSERTION
1. Place your head directly over the lens, making sure that it is level with the surface
that the base was placed on. Your chin should be tucked in toward your chest.
2. Use both hands to firmly hold your upper and lower eyelids open.