User Manual

b. Push the telescoping arm to the horizontal position to break the

suction of the base.

i. If the suction doesn’t release right away, it may be necessary to

use a fingernail or a business card to separate the edge of the

base from the surface that it is suctioned to.

6. Drying the telescoping arm and base:

a. Turn the telescoping arm upside down and shake well to remove any

liquid that is trapped between the segments.

b. Extend the telescoping arm to its full length and use a dry paper towel

to remove all remaining moisture on the telescoping arm and the

suction base.

7. Please ensure that the storage case used to store the device is completely

dry before using it to store your device. This is important for reducing the

growth of microbes in the storage case as well as reducing the chance of

moisture causing damage to the electronics of your device.

a. It’s recommended that you use alcohol or another disinfecting solution

to clean the inside and outside of your storage case at least once per

week. After cleaning, make sure that the case dries completely before

using it to store your device and lens accessories.