User Manual

b. It is normal for saline to spill out of the lens bowl when your eye makes

contact with the lens.

4. Once you feel that the lens has made contact with your eye, move your head

back up and away from the device and slowly release your eyelids.

5. Twist the top half of the light unit clockwise to turn off the light.

6. For your second eye:

a. Repeat steps 10 through 12 in the “Before Lens Insertion” section to

prepare your second lens for insertion.

b. Repeat steps 1 through 5 in the “Lens Insertion” section to insert your

second lens.

7. Cover one eye at a time to see if you can notice any air bubbles that may be

trapped under the lens. It may be helpful to use a mirror and a flashlight to check

for air bubbles.

a. If air bubbles are seen, you must remove the lens and re-insert it.