Manualshelf

Tus neeg siv phau ntawv

ManualsBrandsAUGMENTED VISION LABS ManualsHybrid LensAugmented Vision Labs S5 Inserter Scleral and Hybrid Lens
12345678910
6 ©2022 Augmented Vision Labs, LLC
INSTRUCTIONS FOR USE
BEFORE LENS INSERTION
1. Place the suction base on a smooth, flat surface. Ensure that both the bottom of
the suction base and the surface are clean and dry.
2. Hold down the outer edge of the suction base while pulling metal telescoping
arm upward until it locks into place in the vertical position. This will engage the
suction of the base.
3. Once the telescoping arm is in the vertical position, slide the base of the arm
forward for increased stability (see picture below).
Step 2
Step 3