Tus neeg siv phau ntawv

i. Connect the female end of the provided USB extension cable to the

bottom of the light unit.

ii. Connect the male end of the cable to a desktop or laptop

computer.

b. The light unit will reach a full charge after 1 hour of being plugged in.

6. Adjusting the light brightness:

a. If you notice that the light is dim after a full charge, then it’s time to switch

the lens holder dock to the “extra bright” lens holder dock that was

provided with your device.

i. Ensure that your light unit is tuned off.

ii. Hold the top half of the light unit in place and twist off the orange

lens holder dock by twisting it counterclockwise.

iii. Install the “extra bright” lens holder dock that was provided with

your device and screw it in place firmly.

iv. Turn on the light unit and enjoy the increased brightness.