Technical data

COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11 553
Short Operation Instructions
Settings
Set the call allowance
account to unlimited:
## 8
*
74
*
99999
#
= sub-admin or admin PIN
= ** + internal telephone number of the subscriber (If you do not use
a direct exchange line access, omit the **.)
= 0-99998 currency units (e.g., cent)
Configuration Switchover
Switch configuration: ## 8
*
81 #
= identification number of the configuration
Configuration Switchover (on an External
Telephone)
Switch configuration: ## 8
*
81 #
= external PIN
= identification number of the configuration
DHCP Client
Enable DHCP client: ## 8
*
930
*
1 #
= sub-admin or admin PIN
Disable DHCP client: ## 8
*
930
*
0 #
Query DHCP client status:
## 8
*
940 # (indicated
in the display)
Charges Do-not-disturb
Enable do-not-disturb: ## 8
*
211 #
Disable do-not-disturb: ## 8
*
210 #
Enable call deblocker
(incoming): ## 8
*
221 #
Disable call deblocker
(incoming): ## 8
*
220 #
Enable call restrictor
(incoming): ## 8
*
231 #
Disable call restrictor
(incoming): ## 8
*
230 #
= user PIN
Flash Time
Learn flash timing: ## 8
*
98
*
#
= Flash key
Gateway
Configure gateway: ## 8
*
933
*
#
= sub-admin or admin PIN
= IP address of the gateway (12 digits)
Query gateway:
## 8
*
943 # (indicated in
the display)
IP Address of the PBX
Configure IP address: ## 8
*
931
*
#
= sub-admin or admin PIN
= IP address of the PBX (12 digits)
Query IP address:
## 8
*
941 # (indicated in
the display)