Technical data

Table Of Contents

COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11 441

Configuring and Managing the PBX

DECT System Telephones

Configuring the Function Key for PBX Functions via the Configuration Manager

The function key on a COMfortel DECT 900/900C handset can be assigned to up to ten

programming functions on the PBX.

Configuration can be carried out as follows:

• Via the configuration manager

Requirements:

– Internal S

port (only provided on the COMpact S

module or COMpact ISDN module

available as an option)

– Configuration manager, opened with sufficient authorization

– Configured internal telephone numbers for the base station

– Assigned internal telephone numbers for the mobile handsets

1. Open the page CONFIGURATION > Internal numbers > ISDN subscribers.

2. Click DECT settings.

3. Open the page DECT subscribers.

4. In the list field at the top, select the mobile handset in question by its name or number.

5. In the first Function list field under Function key assignment, select one of the

following options:

When selecting a function, the fields Name and Programming function are pre-

assigned accordingly.

6. In the Name entry field, enter a name for the key or, if necessary, change the prede-

fined name. The following entries are possible:

Note: The name is shown on the display after pressing the function key on a

COMfortel DECT 900/900C handset.

7. In the Programming function entry field, enter a programming function on the PBX

or replace the placeholder for the specified programming function. The following

entries are possible:

---: Enables any function to be entered.

[Function]: Assigns the selected function to the key.

Up to 16 digits

Digits and characters