Technical data

COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11 313
Configuring and Operating Functions
Time and Call Allowance Account
Configuring Credit for a Call Allowance Account
3. Select one of the following options in the Type list field under Add to credit.
4. Only available when Manual has been selected: Enter the desired amount in the
Remaining credit entry field under Add to credit. The following entries are possible:
5. Only available when ... by or ... to has been selected: Enter the desired amount in the
Credited amount entry field under Add to credit. The following entries are possible:
Note: The add credit procedure starts at 0:00 a.m. at the first available point
of time (e.g., Monday, 0:00 a.m. for adding to the credit weekly) of the add
credit rhythm selected.
6. Click Credit now.
Further steps:
– Save your settings before you leave the page.
Configuring Credit for a Call Allowance Account via an Internal Telephone
Requirements:
– Authorization Controlling of the PBX via telephone assigned to the subscriber
– External S
0
port (only COMpact 3000 ISDN or COMpact ISDN module available as an
option)
Important: If using a VoIP account for external calls, the call allowance
account doesn’t work.
– The AOCD service attribute released by the network provider (charge transmission during
the connection)
– An account type configured for the subscriber: A call allowance account
– Knowledge of the sub-admin or admin PIN
Unlimited allowance: Disables the charge verification option. (No other action
is required.)
Manual: Replaces the credit one time with the amount entered in the
Remaining credit.
... by: This regularly increases the credit by the amount entered in the
Credited amount input field.
... to: Regularly replaces the credit with the amount entered in the Credited
amount.
Digits
Digits