Technical data

Table Of Contents

COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11 291

Configuring and Operating Functions

Pickup

Carrying out a Call Pickup

Performing this procedure can be carried out as follows:

• Using a character string on the internal telephone

Requirements:

– Call pickup enabled for the subscriber

– To carry out call pickup of an external call: Exchange line authorization assigned to the

subscriber for incoming calls (International, National, City or only incoming, with

emergency call)

If the answering machine has already taken the call, proceed as described in the following.

1. Pick up the receiver of your telephone.

2. Dial ##06.

3. Enter the internal telephone number of the answering machine that is conducting the

call to be picked up. The following entries are possible:

You are connected with the caller.

** and internal telephone number of the individual answering machine (If

you do not use a direct exchange line access, omit the **.)

** and internal telephone number of the line group (If you do not use a

direct exchange line access, omit the **.)