Technical data

COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11 259
Configuring and Operating Functions
LCR
Creating Networks Manually
3. Click Create LCR networks automatically with help of the area code.
Further steps:
– Save your settings before you leave the page.
– Enter the tariff information in the LCR tables.
Creating Networks Manually
Up to 60 networks can be generated.
Note: LCR networks and the corresponding LCR prefixes can automati-
cally be created based on the local area code (FUNCTIONS > Least Cost
Routing > LCR networks under Create LCR networks automatically with
help of the area code).
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page FUNCTIONS > Least Cost Routing > LCR networks.
2. Enter a name for identification in the first available Name entry field. The following
entries are possible:
3. Click .
The network has been added to the list.
4. Repeat steps 2 to 3 to create additional entries.
Further steps:
– Save your settings before you leave the page.
– Create the corresponding prefixes for the networks to complete the tariff groups.
– Enter the tariff information in the LCR tables.
Up to 16 digits
Digits and characters