Technical data

214 COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
Configuring and Operating Functions
Call Restrictor (Incoming) – Robinson Numbers
Overview of Configured Call Restrictors (Incoming)
3. Click .
4. Click in the line of the corresponding call restrictor.
A page opens for creating telephone numbers/ranges for the call restrictor in
question.
5. Select or clear the Restrict anonymous callers check box.
6. In the Telephone no entry field, enter the telephone number/range. The following
entries are possible:
7. Enter the name of the corresponding telephone number in the Name entry field. The
following entries are possible:
8. Click .
9. Repeat step 6 to 8 to enter additional telephone numbers in the call restrictor.
10. Repeat step 2 to 9 to create additional call restrictors.
Further steps:
– Save your settings before you leave the page.
Overview of Configured Call Restrictors (Incoming)
The overview of call restrictors and deblockers shows all of the previously configured call
restrictors.
Note:
The overview can be opened in the configuration manager by selecting Call
restrictor and deblockers in the list field next to and then clicking .
To close the overview, click Close.
The overview can be printed by clicking Print.
Enables the restrict anonymous callers function.
Disables the restrict anonymous callers function.
Up to 20 digits
Digits
Up to 16 digits
Digits and characters