Technical data

COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11 209
Configuring and Operating Functions
Call Parking
Switching Authorization for Call Parking On/Off
4. Dial the number of the park position. The following entries are possible:
You are conducting a query call with the waiting caller.
Switching Authorization for Call Parking On/Off
If the authorization for call parking is enabled, the subscriber in question can park a caller in
the parking zone or retrieve a waiting caller from the parking zone.
Switching this on/off can be done as follows:
• Separately for subscribers
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click )
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
Authorizations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Call Parking check box.
Further steps:
– Save your settings before you leave the page.
Configuring the Internal Base Telephone Number for the Parking Zone
The internal base telephone number is a telephone number taken from the internal telephone
number plan. When put together with the ten possible park positions 0-9, this creates ten 3 to
4-digit telephone numbers. These numbers can then be used to select the parking zone for call
parking.
0 to 9
Enables authorization for call parking.
Disables authorization for call parking.