Technical data

208 COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
Configuring and Operating Functions
Call Parking
Unparking the Call
4. Wait until you hear the ring tone.
5. Hang up the receiver.
6. Notify the desired communication partner of the waiting caller (e.g., by making an
announcement over the loudspeaker).
Unparking the Call
Requirements:
– Authorization Call Parking assigned to the subscriber
1. Pick up the receiver.
2. Enter the internal base telephone number. The following entries are possible:
3. Dial the number of the park position. The following entries are possible:
You are talking with the waiting caller.
Unparking a Second Call During a Call
Requirements:
– Authorization Call Parking assigned to the subscriber
During a call, proceed as described in the following.
1. Press the Flash key (when using a telephone with DTMF dialling) or the Query key
(when using an ISDN telephone).
2. Dial ##06.
3. Enter the internal base telephone number. The following entries are possible:
** and internal base telephone number for the parking zone (If you do not
use a direct exchange line access, omit the **.)
0 to 9
** and internal base telephone number for the parking zone (If you do not
use a direct exchange line access, omit the **.)