Technical data

COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11 205
Configuring and Operating Functions
Call Forwarding
Configuring the Delay Time for Call Forwarding for External Numbers on No Reply
Requirements:
– External S
0
port (only COMpact 3000 ISDN or COMpact ISDN module available as an
option), external VoIP channel and created VoIP account
– Configuration manager, opened with sufficient authorization
– Expert view (click )
1. Open the page CONFIGURATION > External numbers.
2. In the list field at the top, select the ISDN connection in question.
A page opens for configuring the ISDN connection.
3. Open the page ISDN connection > Name and functions.
4. Select or clear the Use any available call channel check box.
Further steps:
– Save your settings before you leave the page.
Configuring the Delay Time for Call Forwarding for External Numbers on No
Reply
The delay time for call forwarding on no reply for external numbers indicates after how many
seconds a call is forwarded if the subscriber called does not respond.
The delay time applies only to call forwarding that has been configured via the PBX. For a confi-
gured call forwarding configured at the network provider, the delay time is permanently set to
20 seconds.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– External analog port (only COMpact 3000 analog), external S
0
port (only
COMpact 3000 ISDN or COMpact ISDN module available as an option) or external VoIP
channel
– Configuration manager, opened with sufficient authorization
– Use of the feature via the PBX
– Expert view (click )
Enables the use of any available call channels.
Disables the use of any available call channels.