Technical data

36
The Default Factory Settings
PC connected to PBX: Double-click on the PBX icon to display the
connected system telephones.
Please select the telephone to configure and accept it with „OK“.
PC connected to system telephone (COMfort 1200 or
COMfort 2000) and PBX: Double-click on the PBX icon to display the
other connected system telephones.
Please select the telephone to configure and accept it with „OK“.
The default factory settings listed here, can be re-established with a
push of a button (see chapter Initialize Telephone Settings on page 57).
The Default Factory Settings
Alarm function: deactivated
Exchange line authorization: unrestricted exchange line authorization
external call ringing/external call distribution no preset
External to External Transfer: with special exchange line access number only, limited to 15 minutes
Call Waiting: deactivated, Call Waiting only, if call can be taken without finishing the other call
and no other telephone rings
Do-not-disturb deactivated
Call forwarding (AWS): deactivated; are executed via the 2nd B channel
Response time remote switching 10 seconds
Call forwarding from door terminal, external deactivated
Call forwarding from door terminal, internal analog subscribers off, ISDN subscribers on
Connection without dialling/Automatic dialling: deactivated
Authorization for programming of subscriber CF: activated
Authorization for programming of group AWS: deactivated
Authorization of programming of MSN/DDI CF: deactivated
Alarm function: deactivated