Technical data

Appendix
24
Note: If no address is displayed or if you are operating the telephone out-
side of Germany, you can now enter/change the address using the keypad.
Use the softkey (key next to the display) to delete the numbers one at a
time from the right.
3. If the address is correctly displayed, press the softkey.
The firmware update is performed. After this, a message appears in the
display indicating whether the update was successful.
4. Press the softkey to confirm the action.
Further Steps
쑱 Information about new features after a firmware update is usually available
in a new version of the operating manual. This is available per download
from the support pages at the Auerswald web site (Internet address:
www.auerswald.de).
쑱 In order to use the new features after a firmware update of the telephone,
an update of the PBX firmware is often necessary (see PBX manual).
Inserting the Lettering Label
Requirements
– Lettering label. On page 37 of these instructions, you will find lettering
labels that can be cut out and labelled by hand. Using the configuration
manager on the system telephone, you can easily create and print your own
lettering labels on the page Function keys  Key printout.
Steps to Take
1. Squeeze the flexible cover between your thumb and index finger together
and lift the cover off upwards (see Fig. 7 on page 25).
2. Insert the lettering label.
3. Reinsert the cover with the mat surface upwards.