Technical data

Commissioning
19
Further Steps
쑱 Assign the announcements different call types (in the menu of the tele-
phone under answer.machine  functions  TAM announcem.  ...).
However, this can be more easily done via the integrated configuration
manager (recommended; see page 20).
Connecting the Telephone to a PC
Requirements
– A PC with the following features:

PC with Intel Pentium 800 MHz or compatible processor

Windows 2000 (as of Service Pack 4), Windows XP (as of Service Pack
2), Windows Vista 32/64-bit, Mac OS X (as of 10.4), Linux (as of Kernel
2.6)

Memory (RAM: 256 MB, recommended 512 MB;
for Windows Vista: 512 MB, recommended 1 GB)

Browser for the configuration: Recommended Microsoft Internet
Explorer as of version 6.0, Mozilla Firefox as of version 2.0; with HTML
3, HTTP 4.0, JavaScript 1.0, CSS2.0, AJAX

Network card (the computer must be equipped with a network card and
the required driver installed)

Internet protocol TCP/IP (Transmission Control Protocol/Internet Proto-
col)

Mouse or compatible pointing device

SVGA graphics card with a resolution of 800 x 600;
recommended 1024 x 768 and 65536 colours (16 bit)
– PC and telephone on the same network
– Patch cable
Steps to Take
1. Switch on the PC and, if necessary, the system telephone.
2. Insert one end of the RJ-45 patch cable into the right Ethernet port on the
system telephone (see Fig. 6 on page 20).
3. Insert the other end of the RJ-45 patch cable into the network connection of
your PC.