Technical data

Commissioning

Commissioning the Answering Machine

Requirements

– USB memory stick included in the package (already contains several pro-

fessional announcements)

Steps to Take

1. Open the plastic flap that is located to the right on the rear side of system

telephone (see Fig. 5).

2. Insert the USB memory stick into the USB port on the system telephone

(see Fig. 5).

Note: The commissioning of the answering machine by inserting the USB

memory stick can take up to 30 seconds.

Note: If a USB memory stick without enough memory is inserted, the

answering machine cannot be put into operation. is shown on the dis-

play to the lower right.

As soon as the icon appears on the display at the bottom right, the

answering machine is ready for operation.

Note: You can switch off readiness (call acceptance) by pressing the

softkey, and switch it back on by pressing the softkey. The icon indi-

cates the current state.

Further Steps

쑱 Create one or more separate announcements (see page 18).

Fig. 5: Inserting the USB memory stick

USB port on the

back side of the telephone

USB memory stick