Technical data

Preparation
11
씮 Only use the power plug included in the package (type no. HW 824 or
FW7577/EU/40).
10. Place the cable in the available cable channels and hollow areas in such a
way that the cord does not hang through and cause the telephone to sit in
an unstable position.
Connecting the Receiver
Steps to Take
1. Insert the plug, as shown below in Fig. 2, the longer straight end of the spi-
ral cord into the jacked labelled with on the bottom of the telephone.
2. Guide the cable to the outside using the corresponding cable channel (see
Fig. 2).
3. Insert the other end of the spiral cord into the jack on the receiver.
Fig. 2: Receiver connection