Product manual

Audyssey Wireless Speakers Manual 6
Pairing and connecting using Bluetooth wireless technology is very
easy. The Wireless Speakers provide visual and audible feedback so
you know they’re paired and connected.
Press the Bluetooth pairing button
[6] on the back of the right
speaker. You will hear a short two-note beep and the Bluetooth LED
[7] will begin ashing green to indicate discoverable mode. You can
now pair your device to the Wireless Speakers.
Enable Bluetooth on the device you are pairing and, from its
Bluetooth settings, select “Audyssey Wireless Speakers.”
When you hear a single beep you’ll know that the device has
successfully paired. The Bluetooth LED
[7] will also turn a solid
green. Some devices may ask for a password and if yours does just
enter “0000.”
A few seconds may elapse before the
Wireless Speakers appear as “Audyssey
Wireless Speakers” in the device list—
they may come up rst as “Headset” or
something similar.
JUST A NOTE
Bluetooth
®
Wireless
Technology Setup
You are now able to stream audio to the Wireless Speakers.
If you have more in-depth questions about Bluetooth pairing, please
check out the Troubleshooting portion of this manual.
Note: The Wireless Speakers will remember the last device they’ve been connected to. So, after
you leave the Wireless Speakers’ Bluetooth range and become disconnected, when you reenter
the Wireless Speakers’ range the Speakers (if they are on) will automatically reconnect to your
device. And the Speakers will chime with a single beep just to let you know that your audio is
ready to stream.
Audyssey Wireless... Not PairedAudyssey Wireless... Connected
10:03
Bluetooth Settings
Bluetooth Settings
Visible
Device name
ANDROID DEVICE
Make device visible
Connected
Scan devices
Audyssey Wireless Speakers