Product manual

Audyssey Wireless Speakers Manual 5
1. Before plugging your speakers in to an AC wall socket,
connect them to each other using the speaker interconnect
cables
[14].
Connecting Your Wireless Speakers
The Audio Dock Air comes in 2 versions,
110 V and 220 V. When using the Audio
Dock Air in a country of a different
voltage than your unit, you must
use a Step Up or Step Down voltage
transformer of the appropriate wattage.
JUST A NOTE
2. Connect the supplied power cable [12] to the Wireless
Speakers’ power cable plug
[8].
3. Connect the other end of the power cable
[12] to an AC wall
socket. Notice the power LED
[5] will glow a solid red. Your
speakers are now in standby mode.
4. Turn on your speakers. Press and release the front of the
standby knob
[1]. The power LED is now a solid green.
Note: You can open the speaker interconnect cable jack [11] by pressing down on the spring-
loaded button above each jack. Twist the ends of the speaker interconnect cables
[14] so the
strands are not loose. The wires and jacks are color coded; match the colors and plug them in.
Note: For proper stereo playback, make sure the speaker with the volume control [1] is placed
on the right.