Product manual

South of Market Audio Dock Manual 26
sound of the signal spiraling out of control. The solution is to use
the Audio Dock speakers for playback rather than your computer’s
speakers, because we’ve calibrated the Audio Dock microphone-
speaker system to ensure you won’t get feedback. Simply connect
the second of the two supplied 3.5 mm (1/8-inch) cables from your
computer’s headphone output to the Audio Dock’s Aux input. You
should not experience that horrible whine any longer.
Q. What does the USB button on the back of the Audio Dock
do?
A. This button on the back of the Audio Dock is for upgrades and
future computer/Audio Dock communication. Right now it does
nothing, except if you want to reset your Audio Dock to its factory-
programmed settings.
Q. How do I reset my Audio Dock to its factory-programmed
settings?
A. You can perform a factory reset by pressing and holding for five
seconds the Bluetooth and USB buttons on the back of the Audio
Dock simultaneously. You will see the LEDs flash, indicating it is
resetting. If you’ve programmed an EQ change into the Audio Dock
via the South of Market iPhone app, it will now be reset to “flat,” but
the EQ curve will remain in your iPhone app in case you’d like to
enable it for future use.
Q. Does it make sense to use the Audio Dock with my iPad?
A. While you can stream material wirelessly from your iPad to the
Audio Dock using Bluetooth, we didn’t design the Audio Dock
physically for use with the iPad. Therefore, we don’t recommend it.
Q. I think my Audio Dock may be broken or faulty. What do I do?
A. Visit: www.audyssey.com/support
Contact
Audyssey Laboratories, Inc.
350 S. Figueroa Street, Suite 233
Los Angeles, CA 90071
www.audyssey.com