User guide

37
Error Messages
The error windows in this section may appear while using MultEQ Pro. Please
contact Audyssey Technical Support if you request additional troubleshooting
assistance (page 40).
Device Not Detected
This window appears when MultEQ Pro does not detect a connection between the
Sound Equalizer and your laptop. Make sure the USB cable is securely connected.
Input Signal Too Low
This window appears when MultEQ Pro does not detect a strong enough input
signal to record a measurement. Check that the microphone is connected to the
selected input. The preamp gain of the most recent installer kits are fixed and
never require adjustment.
USB Connection Failure
This window appears when MultEQ Pro does not detect a connection to the Sound
Equalizer. Check the USB connection and try again.
Polarity Errors
You may continue with the MultEQ Pro application by clicking “No”, but it is highly
recommended that you check the validity of each warning before continuing.
Correcting for these problems later is not recommended.