User guide

34
Note: The red EQ button on the front of the Sound Equalizer can be used to
turn MultEQ on and off. A Green light on the front panel indicates that the
MultEQ XT filters are engaged and a red light indicates that MultEQ XT is
bypassed.
It is highly recommended that you follow the Audyssey instructions for
demonstrating MultEQ XT to customers (see page 36).
Change the MultEQ XT Filters
There are two options for making adjustments to the MultEQ XT filters:
1 Add more measurement positions or redo your measurements. Click the ◄
button until you return to the Measurement screen.
2 Calculate the MultEQ XT filters with a different target curve. Click the ◄
button until you return to the Target Sound Options screen and select a
new target curve.
View Results – The Customer Certificate
Click the View Results button to view a graphical display
of the frequency response correction for each channel.
The default HTML browser should automatically open a
window displaying a Customer Certificate titled,
“Audyssey MultEQ XT Room Correction Results”. After
permanently saving your results (see section E), you can
print out this certificate immediately or print later from the
Audyssey Installer Website (see page 6).
Permanently Save the MultEQ XT Filters
If you are satisfied with the MultEQ XT
filters, click the Save Permanently to
Sound EQ button. This action will take
several seconds. The status bar will
indicate the saving progress.
If there are still remaining zones needing calibration, click the ◄ button a few
times until you return to the Select a Zone screen.
If installing only one zone, or all zones are now complete, you may proceed to
the Calibration Complete screen.
A message will appear indicating the customer’s Sound Equalizer is now
MultEQ Pro calibrated!
MultEQ XT On/Off Demo
If a customer is present
during the MultEQ On/Off
demo, have them sit
within the room area
measured earlier. If they
are not positioned inside
this area, it is less likely
that they will hear the full
effect of the MultEQ XT
filters.
Audyssey recommends
using the demo material
detailed on page 36 for
MultEQ XT demonstration
to customers.
The Customer Certificate
Until the filters are
permanently committed
to the Sound Equalizer,
only a draft version of the
Customer Certificate is
available to view. This is
clearly shown by the text
“DRAFT” over the
certificate.