User guide

32
Saving Your Work
If you have accepted the edits by previously pressing the OK button, you may now
assign them to one or more channels using the radio buttons to the right of the edit
you created (radio buttons 1-8). Each channel here corresponds to the channels
you selected at the Zone Configuration screen. Be sure to be aware which edits you
assign to which channels.
The Save button becomes available after accepting edits. Click the Save button
(alongside the latest accepted Edit) to save this edit as a .csv file.
The Save As window launches. The save location defaults to the “My
Documents\Audyssey\Measurements” folder of your computer. However, you
may save the files wherever you like as shown above. It is advisable to change the
name of the file so that you will remember the purpose of your edit.
You may load any saved csv file while viewing the Target Curve Designer window
and pressing the “Load…” button. This same folder will be launched.