User guide

20
Job Information
Enter the customer or job name in the Customer or Job Name fields.
Enter your name in the Technician’s Name field
Options
Choose which microphone you are using from the menu under the
Microphone heading. Select the microphone that has the serial number
matching the serial number on the microphone you are using.
Job Information
This information is used
to manage customer
calibration results on the
Audyssey Installer
Website (page 6).
Calibration results and
customer certificates are
listed on the Audyssey
Installer Website by the
customer or job name
entered at the Job
Information screen.
Options
The importance of
microphone calibration
is often overlooked.
Even the highest quality
micro-phones often
contain small variations
that cause measurement
artifacts. As part of
preparing the Installer
Kit, Audyssey measures
each microphone
individually and stores a
unique calibration file on
each MultEQ Pro
application CD. This file
ensures that the MultEQ
Pro room correction
filters take into account
the frequency response
variations of each
individual microphone
used for calibration.
In the case that multiple
Installer Kits are
available (more than one
micro-phone), it is
important to choose the
correct serial number for
the microphone in use
during installation.
If the serial number
listed in the menu does
not match the serial
number on the
microphone you are
using, contact Audyssey
technical support (p. 40).
If you have more than
one Installer Kit, it is
highly recommended
that you install the mic
calibration curve file
from each Kit’s MultEQ
Pro Installation CD on
each of your laptops.
This way everyone at
your company can share
Installer Kits.