User guide

13
Setup at Customer Installation Site
Preamplifier/Processor Connections to the Sound Equalizer
Before proceeding, the Sound Equalizer, amplifier(s) and preamplifier/processor
should be powered off.
Make the necessary audio connections between the outputs of the
preamplifier/processor and the ANALOG INPUT channels of the Sound Equalizer.
Warning: Do not connect the calibrated microphone to the 1/Mic input of the
Sound Equalizer at this time. Doing so before you complete the Product Selection
screen as part of the MultEQ Pro application (page 19) will cause microphone
feedback at levels that could damage the speakers.
The Sound Equalizer 1/Mic
Input has two functions:
1 It is the input for the
calibrated microphone
during calibration
2 It is the channel 1 audio
input that connects to
the line-level audio
output of the
preamplifier/processor
(usually the left channel)
ANALOG INPUT
1/Mic 3 5 7
1/Mic