Product manual
Audyssey Audio Dock Air Manual 6
To use the Audio Dock Air with AirPlay over your Wi-Fi network, you
need to congure the device settings and pair it with your wireless
network (rst-time setup only). The following steps provide an
overview of this process. See “AirPlay Setup and Conguration” for
detailed setup instructions.
1. Create the Audio Dock Air setup network.
2. Connect to the setup network from your computer or mobile
device and congure the Audio Dock Air settings in your
browser.
3. Connect the Audio Dock Air to your existing wireless home
network.
If using the Audio Dock Air with a wired audio device (CD player,
MP3 player, computer, etc.), simply connect the device using the
supplied 3.5 mm audio cable.
1. Connect one end of the 3.5 mm audio cable to the output
of the device. If the device uses a different type of jack
for its output, you may need to use an audio adapter (not
included).
2. Connect the other end of the 3.5 mm audio cable to the
auxiliary input on the back of the Audio Dock Air.
PAIR
AUX
PWR
Wired Mode
AirPlay Wireless Mode (Overview)
Wi-Fi networks can take additional
time when adding a new device onto
the network. Please allow plenty of time
for your Audio Dock Air to connect to
your network.
JUST A NOTE