User Manual

ManualsBrandsAudix ManualsStudio MicrophonesF2

OVERVIEW:

Designed, assembled and tested by Audix in the USA, the f2

is a dynamic instrument microphone used for stage and studio

applications. The f2 is characterized with a hypercardioid pickup

pattern for isolation and feedback control and is equipped with

a LM™ (Low Mass) diaphragm for natural, accurate sound

reproduction.

The f2 is lightweight, compact and easy to position. With a wide

frequency response of 52 Hz - 15 kHz and the ability to handle

sound pressure levels of 139 dB, the f2 is an excellent choice for

miking instruments with a percussive nature such as rack toms,

congas, saxophone, guitar cabinets and brass.

Roadworthy construction includes a precision cast zinc alloy

body, black coat nish, laser etched model and serial number,

steel mesh grill, gold XLR connector and a tension-t heavy duty

nylon mic clip.

Transformerless design, low impedance and balanced output

allow for interference-free performance even with long cable runs.

APPLICATIONS:

Rack toms, congas, floor tom

Guitar and bass cabinets

Saxophone, brass

SUPPLIED ACCESSORIES:

Tension-fit heavy duty mic clip (DCLIP)

Carrying pouch (P1)

OPTIONAL ACCESSORIES:

TRIPOD - Mic stand

DFLEX - All purpose percussion clamp

DVICE - Spring loaded rim mount clamp

DCLAMP - Tension rod mic clamp

CBL20 - 20’ XLR cable

CBL-DR25 - 25’ right angle XLR cable

STAND-KD - Adjustable short boom mic stand

CAB GRABBER - Tension held mic holder, clamps to guitar cabinets

DYNAMIC INSTRUMENT MICROPHONE

Dynamic Instrument

DCLAMP w/ f2 DFLEX CBL-DR25 w/ f2 CAB GRABBER STAND-KD

FEATURES:

Compact, lightweight

Cast zinc alloy body

LM (low mass) diaphragm

Studio quality sound

Excellent mid-bass transient response

Handles high SPL without distortion

Roadworthy construction

3 year warranty

Summary of content (2 pages)

PAGE 1
Dynamic Instrument f2 DYNAMIC INSTRUMENT MICROPHONE OVERVIEW: Designed, assembled and tested by Audix in the USA, the f2 is a dynamic instrument microphone used for stage and studio applications. The f2 is characterized with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a LM™ (Low Mass) diaphragm for natural, accurate sound reproduction. The f2 is lightweight, compact and easy to position.
PAGE 2
f2 SPECIFICATIONS: Transducer Type Frequency Response Polar Pattern Output Impedance Sensitivity Capsule Technology Off Axis Rejection Maximum SPL Power Requirements Connector Dynamic 52 Hz - 15 kHz Hypercardioid 580 ohms 2 mV / Pa @ 1k LM Type A >20 dB ≥139 dB None 3 pin gold plated male XLR connector Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector Cast zinc alloy / Black coat 247 g / 8.7 ounces 104 mm / 4.