User's Manual

Hint: Padding the sensitivity of the capsule at the source is the most eﬀective way

to control distortion without changing the natural sound quality or response of

the microphone.

USING THE B60 BODYPACK TRANSMITTER

There are three buttons that control the menu functions—SET, UP (forward) and DOWN

(backwards). The functions controlled by the buttons are RF OUTPUT, LEVEL and LOCK.

There are 3 menu functions:

RF POWER OUTPUT, LEVEL, LOCK.

RF POWER OUTPUT

This controls the level of the

RF output. LO = 10 Milliwatts or

HIGH = 30 Milliwatts.

TO SET RF POWER OUTPUT

Make sure the bodypack is turned ON. Press and hold the SET button. Press the UP button

until “RF AMP” or “RF OUTPUT” appears on the display. Press the SET button and the

display will ﬂash, indicating the current setting, either “HIGH” or “LO” or 10mW˝ or 30mW”,

depending on which bodypack model version you have. Press the UP button to toggle

between HIGH = 30 milliwatt or LO = 10 milliwatt. Press SET to save the setting.

Hint: The Lo gain setting is helpful on a smaller stage with direct line of sight or in areas

with a lot of wireless congestion. It also improves battery life.

GAIN CONTROLS

There are two level settings: Line Level and Mic Level.

Mic level features three relative gain settings: 0, -6, -12.

Line level features -24 dB for active guitar or bass pickups.

SET

POWER

(ON/OFF/MUTE)

UP (forward)

DOWN (backwards)