Data Sheet

ADX60

OVERVIEW

The ADX60 is a professional pre-polarized condenser microphone designed for stage,

studio and broadcast applications. The ADX60 is known for its high sensitivity and

ability to handle distance and area miking for a wide variety of applications including

conferencing, plays, theatre and acoustic instruments.

Characterized with a uniformly controlled hemi-cardioid polar pattern, the ADX60

is designed to capture a speciﬁc designated area, hence the name “boundary

microphone.” With a wide frequency range of 50 Hz - 18 kHz, the ADX60 is requires

9 - 52 Volts phantom power for operation and is equipped with a 25’ cable and

phantom power adapter (APS910).

The ADX60 is very easy to position, durable and manufactured with high standards

and tight tolerances. Roadworthy construction includes a precision die cast zinc

casing, high performance 12 mm capsule, black e-coat ﬁnish, laser etched model and

serial number, steel mesh grill, space saving mini-XLR connector and rubber base for

dampening purposes.

SUPPLIED ACCESSORIES

CBL60 -

25’ detachable mic cable with mini XLRf connectors

APS910 - Phantom power adapter

P1 - Carrying Pouch

OPTIONAL ACCESSORIES

APS911 - Battery operated phantom power adapter with on-off

switch and bass roll-off

BOUNDARY CONDENSER

MICROPHONE

ADX60

FEATURES

· Highly sensitive

· Designed to pick up specified areas

· Excellent sonic characteristic

· Roadworthy construction

APPLICATIONS

· Live sound, recording

· Podium

· Stage presentations

· Theatre

· Piano

· Religious ceremonies, weddings

· Teleconferencing, boardroom

· Room ambience

· Courtroom

APS910 APS911

PAGE 1
ADX60 BOUNDARY CONDENSER MICROPHONE OVERVIEW The ADX60 is a professional pre-polarized condenser microphone designed for stage, studio and broadcast applications. The ADX60 is known for its high sensitivity and ability to handle distance and area miking for a wide variety of applications including conferencing, plays, theatre and acoustic instruments.
PAGE 2
The microphone shall be a back plate pre-polarized condenser with a modular Transducer Type Pre-Polarized Condenser Frequency Response 50 Hz - 18 kHz Polar Pattern Cardioid Output Impedance 250 ohms balanced Sensitivity 9 mV / Pa @ 1k Equivalent Noise Level <29 dB (A-weighted) Signal to Noise Ratio >65 dB Maximum SPL ≥130 dB Power Requirements None OPERATION AND MAINTENANCE Cable/Connector Miniature female XLR connector The ADX60 is a low impedance microphone and should be plugged into