Service manual

STP 11-25R13-SM-TG
3 - 60
Performance Steps
d. Upon arriving at the lowest satellite, you may find that it is not as clear as it was when you
started.
(1) Find the point at which the picture is as clear as possible and slightly loosen the collar
bolts just enough to rotate the dish on the pole.
(2) Rotate the dish one way or another; one direction clears the picture quality. Snug the
collar bolts.
e. Rotate and adjust the actuator together to get the pictures as clear as possible before
tightening up the collar bolts.
6. Program the receiver.
7. Document work accomplished on a DA Form 2407.
Performance Measures Results
1. Choose a good site with a clear view of the sky. P F
2. Set the pole for ground mounting the dish. P F
3. Install the dish on a roof, if unable to ground mount. P F
4. Assemble the dish. P F
5. Align and track the TVRO. P F
6. Program the receiver. P F
7. Document work accomplished on a DA Form 2407. P F
Evaluation Guidance: Score the soldier a GO if all steps are passed (P). Score the soldier a NO-GO if
any step is failed (F). If the soldier fails any step, show what was done wrong and how to do it correctly.
Have the soldier practice until he can correctly perform the task.
References
Required Related
DA Pam 738-750 Nelson Hill Electronics
Mfg Manuals TB 385-4