Service manual

STP 11-25R13-SM-TG
3 - 7
Performance Measures Results
1. Turn OFF and remove power from the VTR. P F
2. Clean the VTR exterior. P F
3. Check for discrepancies. P F
4. Remove the VTR cover and shielding to clean tape path. P F
5. Clean the head drum assembly. P F
6. Clean tape transport contact surfaces. P F
7. Clean the pinch roller. P F
8. Check drive belts, pulleys, and pad assemblies. P F
9. Clean photo interrupters or sensors. P F
10. Inspect mechanical levers and cams. P F
11. Inspect the lubrication of components. P F
12. Reapply power and check mechanical alignment. P F
13. Lubricate the SEARCH DIAL assembly, if necessary. P F
14. Turn OFF power and spot clean the tape path. P F
15. Replace any shielding or hardware displaced to gain access to the tape path; then
reapply power.
P F
16. Operations check the VTR. P F
a. PLAYBACK mode. P F
b. E-E mode. P F
c. RECORD mode. P F
d. Front panel and remote control settings and functions. P F
17. Complete the necessary maintenance forms. P F
Evaluation Guidance: Score the soldier a GO if all steps are passed (P). Score the soldier a NO-GO if
any step is failed (F). If the soldier fails any step, show what was done wrong and how to do it correctly.
Have the soldier practice until he can correctly perform the task.
References
Required Related
DA Pam 738-750
Mfg Manuals