Service manual

STP 11-25R13-SM-TG
T - 9
Figure T-3. Safety Hook; Fabrication Diagram
NOTE: First aid kits, resuscitators, and snakebite kits may also be placed on
board when approved by medical authorities.
(5) Safety boards will be hung in an easily reached place in the area where work is performed.
m. Bench tops in electrical/electronic repair shops should be nonconductive, and only a minimum
of connected equipment should be on the bench tops.
n. The exact location of the panel board for the electrical circuits in your work area should be
known to allow remote shutoff of apparatus in an emergency situation. Main breakers shall be
prominently labeled.