Owner`s manual

38
OWNER’S MANUAL / TH uno
Digital domain
0
5
8
7
64
3
2
1
9
REM Out
Stereo Pre In
REM In
Digital (Optical) Out
BRIDGE 0 180
PHASE
MASTER
CHAIN
PUSH
LEVEL
0.3 ÷ 1.2V RMS
1.2 ÷ 4.8V RMS
Hi :
Lo :
TH uno
Front Panel
TH configured in MASTER mode
Input: Digital Optical S/P DIF
Pre Out: Stereo Analog (R and L Ch of Digital Input)
Power Output: Mono
How to connect a source through an optical digital
input in a system featuring other non-TH amplifiers
In this case the DRC is REQUIRED in order to:
- Adjust general volume
- Select the optical input
PRE OUT:
see page 44 to check how to manage it
In order to take advantage of
Volume control, Balance,
Fader and Sub through the
DRC also on the PRE output,
the AMP ID - Preout needs to
be set to the ASC Setup.
Setting changed
See page 34
130.com.ua
Autogood products internet store http://130.com.ua