Owner`s manual

17
OWNER’S MANUAL / TH uno
Classic domain
BRIDGE 0 180
PHASE
MASTER
CHAIN
PUSH
LEVEL
0.3 ÷ 1.2V RMS
1.2 ÷ 4.8V RMS
Hi :
Lo :
BRIDGE 0 180
PHASE
MASTER
CHAIN
PUSH
LEVEL
0.3 ÷ 1.2V RMS
1.2 ÷ 4.8V RMS
Hi :
Lo :
123
BRIDGE 0 180
PHASE
MASTER
CHAIN
PUSH
LEVEL
0.3 ÷ 1.2V RMS
1.2 ÷ 4.8V RMS
Hi :
Lo :
TH uno
PUSH
LEVEL
0.3 ÷ 1.2V RMS
1.2 ÷ 4.8V RMS
Hi :
Lo :
Low level
1) 2)
High level
1 • LEVEL: Input sensitivity adjustment. It features 2 ranges, Hi from .3 to 1.2 VRMS and Low from 1.2 to 4.8
VRMS. By pushing for three seconds on the knob you can change the range. To see voltage value and
range check the ASC display. Those controls are also available if ACNet sofware is used.
2 • AMP MODE: This switch sets the working mode of the amplifier (see pages 14 - 15 - 16).
3 • PHASE: This switch regulates the absolute acoustic phase of the amplifier.
Input controls
Functions Description
How to move from one sensitivity range to another
TURN THE KNOB TO REGULATE THE LEVEL
PRESS THE KNOB FOR 3” TO CHANGE
THE RANGE FROM LO TO HI
TURN THE KNOB TO REGULATE THE LEVEL
PRESS THE KNOB FOR 3” TO CHANGE
THE RANGE FROM HI TO LO
NOTE: when passing from LO to HI level, sensitivity is automatically set on the lowest value. When adjusting
sensitivity, ASC will show the clipping, if occurring, on the display (see point 7, page 55)
130.com.ua
Autogood products internet store http://130.com.ua