Owner`s manual

ManualsBrandsAudison ManualsAutomotiveLR 72

In store "130" you

can find and buy almost all necessary goods for your auto

Kyiv and other cities, delivery by ground and postal services. Our experienced

consultants will provide you with exhaustive information and help you to chose

the very particular thing. We are waiting for you at the address

http://130.com.ua

PHONES

(044) 360-7-130

(050) 336-0-130

(063) 788-0-130

(067) 233-0-130

(068) 282

130

Internet store of

autogoods

CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |

CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |

GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules

• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps

• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors

• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation

• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits

• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors

• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •

Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant

ICQ

294-0-130

597-0-130

SKYPE

km-130

Summary of content (72 pages)

PAGE 1
PHONES (044) 360-7-130 (050) 336-0-130 (063) 788-0-130 (067) 233-0-130 (068) 282-0-130 Internet store of autogoods ICQ 294-0-130 597-0-130 SKYPE km-130 CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories | CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model compute
PAGE 2
a u . m o c . 0 PRELIMINARY 3 1 MANUAL TH uno ADVANCED Car Audio Mono Amplifier www.audison.eu Autogood products internet store http://130.com.
PAGE 3
OWNER’S MANUAL / TH uno INDEX THESIS - The project Packaging Contents Installation Fixing template Rear Panel Functions Description How to remove the panel / the protection knob How to connect the power supply How to replace the fuse How to connect the speakers using one amplifier (MASTER) How to connect the speakers using two amplifiers in BRIDGE mode (MASTER+BRIDGE) How to connect the speakers using more than one amplifier in CHAIN mode (MASTER+CHAIN) Input controls Functions Description How to move from
PAGE 4
OWNER’S MANUAL / TH uno INDEX How to connect an analog and a digital source in a system featuring more than one TH amplifier (IN R or IN L) How to connect an analog and a digital source in a system featuring other non-TH amplifiers (IN R o IN L) ASC - Amplifier Status Controller Setup Amplifier: Amp ID Setup Amplifier: Amp ID-Preout Front Panel How to adjust the PRE OUT analog output ASC - Amplifier Status Controller Setup Amplifier: X-Over Slope DUAL POWER & BIAS CONTROL Setup Amplifier: DUAL POWER Settin
PAGE 5
OWNER’S MANUAL / TH uno THESIS The Project The roads travelled to reach “the Sound” have created a conceptual cross-road, where state of the art digital technology and traditional techniques have gone their separate ways. They both have benefits of a different nature, yet are capable of merging together to achieve much higher Sound quality levels. The Thesis amplifiers are born from these considerations.
PAGE 6
OWNER’S MANUAL / TH uno Packaging Contents - TH uno amplifier - Printed Quick Start Guide - 1.0 m AC Link (RJ-12) cable - 1.0 m AD Link (RJ-45) cable - 2.0 m USB cable - USB/AC Link converter a u . m o c . 0 - TH crossover kit composed of: HI PA SS Band - N. 1 TH-MXR stereo module Filte Modrs e Hi Freq uenc y TH -M Sett ing XR .1 Mon Lo o Pass LO PA SS 24 dB - N.8 frequency set modules (SS1-SW1-SW2-WM1-WM2-MT1-WT1-MT2) - N. 2 CFB customizable modules 3 1 - N.
PAGE 7
OWNER’S MANUAL / TH uno TH uno External size 259 mm / 10.19“ Installation 510 mm / 20.07“ a u . m o c . 0 6 Autogood products internet store http://130.com.ua f 4.3 x 10.5 mm 3/16” x 7/16” General - 0 180 PHASE CAP BRIDGE CHAIN MASTER 478 mm / 18.82” 160 mm / 6.30” + - Speaker B 12V TH uno LEVEL 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 8
a u . m o c . 0 3 1 7 Autogood products internet store http://130.com.
PAGE 9
A A B a u . m o c . 0 Fixing template 3 1 8 Autogood products internet store http://130.com.
PAGE 10
A B A B 8 7 901 654 a u . m o c . 0 Mode A 3 1 2 3 level panel spacer 66 mm (2.6”) Mode B level panel spacer 9 Autogood products internet store http://130.com.ua 26 mm (1.
PAGE 11
A 8 7 901 654 2 3 level panel spacer a u . m o c . 0 3 1 66 mm (2.6”) B level panel spacer 26 mm (1.02”) 10 Autogood products internet store http://130.com.
PAGE 12
OWNER’S MANUAL / TH uno Rear Panel Functions Description 5 FUSE 150A Speaker A + Speaker B - - + 12V - CAP 3 2 1 4 SPEAKER A + CAP - POWER + SPEAKER B + - + - 12 V a u . m o c . 0 1 • POWER: Positive and negative terminals for 12 V car voltage supply. Size of connectors is 10 mm diameter (2 AWG). Warning: connect positive and negative (GND) with polarity as indicated in the terminal. A wrong connection cause an amplifier damage.
PAGE 13
OWNER’S MANUAL / TH uno Rear Panel How to connect the power supply a u . m o c . 0 Speaker A + FUSE 150A - CAP - 12V Speaker B + SPEAKER + CAP + - POWE R + B - L L :m Ø : m in 1 M ax 6 AX 26 m :2 m m AW m (5/8 G (1”) ”) + Fuse Holder Battery Ground Ground General Super Capacitor SPEAKER - 12 V 3 1 - A 12 Autogood products internet store http://130.com.
PAGE 14
OWNER’S MANUAL / TH uno Rear Panel How to replace the fuse a u . m o c . 0 Fuse AFS 150 A (provided) 3 1 Speaker A + SPEAKER + FUSE 150A - CAP - 12V Speaker B + - A + CAP - POW ER + SPEAKER B + - General 12 V 13 Autogood products internet store http://130.com.
PAGE 15
OWNER’S MANUAL / TH uno Rear Panel How to connect the speakers using one amplifier (MASTER) PUSH a u . m o c . 0 LEVEL Hi : Lo : - 12V Speaker B + - A + CAP + 0 180 PHASE FUSE 150A - CAP SPEAKER BRIDGE CHAIN MASTER - POWE R + SPEAKER B - 12 V + - L L :m Ø : ma in 1 M x 2 AX 16 m :6 m m( AW m 1/2 ( G 5/8 ”) ”) 3 1 Speaker A + 0.3 ÷ 1.2V RMS 1.2 ÷ 4.8V RMS Speaker B connected in parallel with Speaker A General Speaker A 14 Autogood products internet store http://130.com.
PAGE 16
OWNER’S MANUAL / TH uno Rear Panel How to connect the speakers using two amplifiers in BRIDGE mode (MASTER + BRIDGE) 8 7 901 654 2 3 PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.8V RMS 0 180 PHASE a u . m o c . 0 Speaker A + FUSE 150A - CAP - 12V Speaker B + SPEAKER - A + CAP + - POWE R + SPEAKER B - 12 V + - 3 1 PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 17
OWNER’S MANUAL / TH uno Rear Panel How to connect the speakers using more than one amplifier in CHAIN mode (MASTER + CHAIN) 8 7 901 654 2 3 PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.8V RMS 0 180 PHASE Speaker A FUSE 150A a u . m o c . 0 + - CAP - 12V Speaker B + SPEAKER + CAP + - POWE R + 3 1 SPEAKER B - 12 V Speaker Min 1 7 Load - A + - PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 18
OWNER’S MANUAL / TH uno Input controls Functions Description 1 2 3 PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.8V RMS 0 180 PHASE a u . m o c . 0 1 • LEVEL: Input sensitivity adjustment. It features 2 ranges, Hi from .3 to 1.2 VRMS and Low from 1.2 to 4.8 VRMS. By pushing for three seconds on the knob you can change the range. To see voltage value and range check the ASC display. Those controls are also available if ACNet sofware is used.
PAGE 19
OWNER’S MANUAL / TH uno Front Panel Functions Description 1 3 2 8 7 4 7 901 654 2 3 8 6 5 9 a u . m o c . 0 1 • IN L/R: Analog Input Left / Right 2 • OUT L/R: Bypass Analog Output Left / Right.
PAGE 20
OWNER’S MANUAL / TH uno Front Panel How to connect the remote a u . m o c . 0 MEN U DOW N ENT ER UP PUSH Hi : Lo : LEVEL 0.3 ÷ 1.2V 1.2 ÷ 4.8V RMS RMS BRIDG CHAIN E MASTE R 3 1 0 180 PHAS E Rem Out Rem In Rem In L: 7 mm (5/16”) MAX: 16 AWG General Rem Out 19 Autogood products internet store http://130.com.
PAGE 21
OWNER’S MANUAL / TH uno Front Panel How to connect the source through the preamplified analog input (standard mode) TH configured in MASTER mode Input: Pre Out: Power Output: Stereo Analog Stereo Analog Mono Mix L+R a u . m o c . 0 TH uno Default preset 3 1 PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 22
OWNER’S MANUAL / TH uno Front Panel How to connect the source through the IN R preamplified analog input (standard mode) TH configured in MASTER mode Input: Pre Out: Power Output: Mono IN R Analog Mono Analog = IN R Mono = IN R a u . m o c . 0 TH uno Default preset 3 1 PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 23
OWNER’S MANUAL / TH uno Front Panel How to connect the source through the IN L preamplified analog input (standard mode) TH configured in MASTER mode Input: Pre Out: Power Output: Mono IN L Analog Mono Analog = IN L Mono = IN L a u . m o c . 0 TH uno Default preset 3 1 PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 24
OWNER’S MANUAL / TH uno Electronic Crossover Representing a high-end solution, the simplicity and power of the analog system found in the HV venti is thrust forward again in the TH, making use of the amplifiers versatility. The crossover ONLY acts on the amplifier power output, not on the PRE OUT output which is always a bypass. The alignment is a Butterworth type as, when either of the TH amplifiers is set up in a mono configuration, the slope of the filter can be set for 24 dB Oct operation.
PAGE 25
OWNER’S MANUAL / TH uno Electronic Crossover Crossover Slope 12 dB (default configuration) It is possible to set the crossover slope at 12 or 24 dB/Oct. - The TH-MXR.1 board must be inserted; - You need to operate on the ASC specific Setup Amplifier step. (See page 46). Through the Status Monitor it is possible to check anytime the presence of the filter as well as the set slope. TH uno DO NOT INSERT TH-MXR.1MODULE PUSH a u . m o c . 0 LEVEL Hz Hi : Lo : 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 26
OWNER’S MANUAL / TH uno Electronic Crossover Crossover Slope 24 dB If ASC is set at 24 dB Oct., it is anyway possible to set the crossover Low-pass at 12 or 24 dB Oct. - The TH-MXR.1 board must be inserted; - You need to operate on the TH-MXR.1 switch (see page 46). Through the Status Monitor it is possible to check anytime the presence of the filter as well as the set slope. TH uno DO NOT INSERT TH-MXR.1MODULE a u . m o c . 0 PUSH Hz LEVEL Hi : Lo : 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 27
OWNER’S MANUAL / TH uno Electronic Crossover How to insert Not inserted module (default configuration) TH uno a u . m o c . 0 Hz You can verify the crossover presence by checking the ASC Status Monitor. See page 53 3 1 Inserting module PUSH LEVEL Hi : Lo : 0.3 ÷ 1.2V RMS 1.2 ÷ 4.8V RMS Hi-pass 12 dB 180 BRIDGE CHAIN MASTER 0 180 PHASE Lo-pass 12 dB 1.
PAGE 28
OWNER’S MANUAL / TH uno Example: TH amplifier on Subwoofer Analog Input Subwoofer In order to build a Standard System you have to: SPEAKER B - 1- Insert the TH-MXR.
PAGE 29
OWNER’S MANUAL / TH uno Subwoofer Woofer Tweeter Example: Two Way + Sub, bi-amplified, TH amplifier Analog Input SPEAKER B - Passive Crossover Hz You have to follow same steps as per the above example. The only difference is for point 4, the second TH is a TH uno (mono); + In order to add DRC to the System you also need to: SPEAKER A 0 180 PHASE 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 30
R L IN A DC OUT 29 Autogood products internet store http://130.com.ua 654 901 2 3 8 7 8 7 654 2 3 2 3 901 654 901 ADRS 8 7 Classic domain IN OPTICAL R R 1 - AC Link - 2 L OUT A R CONTROL BUS L OUT A R IN OUT REM Front Panel Hi : Lo : PUSH Front Panel Front Panel SW1 or SW2 mono + RIGHT - A Channels WM2 or WT1 + LEFT - Rear Panel 3 1 12 V - POWER + WM1 or WM2 + CAP WT2 or MT1 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 31
OWNER’S MANUAL / TH uno Subwoofer In order to build a Standard System: You have to follow same steps as per the above example. The only difference is that TH uno becomes the audio chain first amplifier, thus being able to manage the whole system; SPEAKER B - Passive Crossover Hz Woofer Tweeter Example: Two Way + Sub, bi-amplified, with and without TH amplifiers. Analog Input + a u . m o c . 0 7- Set ADRS on the Front Panel; 8- Set the Amp ID in the ASC Setup Amplifier as Sub.
PAGE 32
31 Autogood products internet store http://130.com.ua Analog Source Rem OUT 654 901 2 3 2 3 Classic domain 8 7 654 901 PRE OUT LEFT PRE IN mono PRE IN RIGHT PRE OUT 0.3 ÷ 1.2V RMS 1.2 ÷ 4.8V RMS LEVEL TH uno BRIDGE CHAIN MASTER USB / AC Link Converter ACNet (Optional use) Front Panel Hi : Lo : PUSH Front Panel Rem IN mono SPEAKER 3 1 Rear Panel 0 180 PHASE Rear Panel + SPEAKER A - SS1 SW1 or SW2 + CAP 12 V - POWER + SW1 or SW2 WM1 or WM2 + SPEAKER B a u . m o c .
PAGE 33
OWNER’S MANUAL / TH uno THESIS ASC (AMPLIFIER STATUS CONTROLLER) The TH amplifiers ASC unit is the operational interface, programmed to control all of the amplifier’s functions. The user can interact with the microprocessor which, without interfering with the sound, will provide control for any possible adjustments. This manual section is especially thought for those who want to get the most of these amplifiers exclusive features.
PAGE 34
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller Functions Description 2 3 TH uno 1 Default display 4 a u . m o c . 0 2 • MENU: this switch enables the ASC and shows the first available entry. Each time this switch is pushed while the amplifier is normally working, the ASC displays the first available entry, not the last you worked on.
PAGE 35
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller Setup Amplifier: Main Input The first step to set the amplifier up is to select the main input the TH will use to get the signal. As soon as you turn the amplifier on, the PRE analog input is selected by default. By changing this entry the user can also take advantage of the other operational modes. From next time you turn the TH on, it will use the last selected entry. If another input is used, the DRC is required.
PAGE 36
OWNER’S MANUAL / TH uno Digital Inputs How to adjust the volume control and input selector using a digital source In the following pages you will find examples of how to connect the TH to a system driven by head units using the digital input. In order to use the TH IN OPTICAL digital input and therefore its D/A internal converter the DRC Digital Remote Control MUST be connected to the TH amplifier.
PAGE 37
OWNER’S MANUAL / TH uno Front Panel How to achieve same output volume level using an analog source (with its own volume control) and a digital source Once you have adjusted the system, therefore once the amplifiers input sensitivity has been adjusted, you can adjust the digital source volume level so that when selecting the analog or the digital source no difference in sound is perceptible while listening.
PAGE 38
OWNER’S MANUAL / TH uno Front Panel How to connect a source through the optical digital input in a system featuring more than one TH amplifier TH configured in MASTER mode Input: Pre Out: Power Output: Digital Optical S/P DIF Digital AD Link (Repeats the IN OPTICAL signal) Mono a u . m o c . 0 TH uno PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 39
OWNER’S MANUAL / TH uno Front Panel How to connect a source through an optical digital input in a system featuring other non-TH amplifiers TH configured in MASTER mode Input: Pre Out: Power Output: Digital Optical S/P DIF Stereo Analog (R and L Ch of Digital Input) Mono a u . m o c . 0 TH uno Setting changed See page 34 LEVEL Hi : Lo : 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 40
OWNER’S MANUAL / TH uno Front Panel How to connect an analog and a digital source in a system featuring more than one TH amplifier TH configured in MASTER mode Input: Pre Out: Power Output: Analog/Digital Optical S/P DIF Analog/Digital AD Link Mono a u . m o c . 0 TH uno PUSH LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 41
OWNER’S MANUAL / TH uno Front Panel How to connect an analog and a digital source in a system featuring other non-TH amplifiers TH configured in MASTER mode Input: Pre Out: Power Output: Analog/Digital Optical S/P DIF Stereo Analog Mono a u . m o c . 0 TH uno Setting changed See page 34 LEVEL Hi : Lo : 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 42
OWNER’S MANUAL / TH uno Front Panel How to connect an analog and digital source in a system featuring more than one TH amplifier TH configured in MASTER mode Input: Pre Out: Power Output: IN R or IN L Analog/Digital Optical S/P DIF Analog (=IN R or IN L) /Digital AD Link In Analog: Mono (=IN R or IN L) In Digital: Mono (=MIX L+R) a u . m o c . 0 TH uno Setting changed See page 34 LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 43
OWNER’S MANUAL / TH uno Front Panel How to connect an analog and a digital source in a system featuring other non-TH amplifiers TH configured in MASTER mode Input: Pre Out: Power Output: IN R or IN L Analog/Digital Optical S/P DIF Analog (=IN R or IN L) In Analog: Mono (=IN R or IN L) In Digital: Mono (=MIX L+R) a u . m o c . 0 TH uno Setting changed See page 34 LEVEL Hi : Lo : BRIDGE CHAIN MASTER 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 44
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller Setup Amplifier: Amp ID AMP ID stands for Amplifier IDentification. The AMP ID is a way to identify the task the amplifier performs inside the system. The AMP ID does not affect the electric functioning and does not act on the amplifier electronic crossover. The AMP ID is fundamental to adjust Volume, Balance, Fader as well as Sub Volume when the DRC is connected. The ASC recognises the function the amplifier has been given through the ID.
PAGE 45
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller Setup Amplifier: Amp ID-Preout The AMP ID can also be assigned to the PRE OUT output. This function is extremely useful in case the TH amplifier is added to a pre-existing system featuring not only TH amplifiers or if you want to add to the TH system a non-TH amplifier. This way you can anyway know the non-TH amplifier function as well as adjust its volume.
PAGE 46
OWNER’S MANUAL / TH uno Front Panel How to adjust the PRE OUT analog output As already said, the AMP ID can also be assigned to the PRE OUT output, but not only to it. Through the ACNet software also the PRE OUT sensitivity can be adjusted to align the gain of the amplifier connected to that output, thus adapting sensitivity according to the system general volume increase and decrease. The procedure to perform this operation is the following: 1- Connect the (non-TH) amplifier to the PRE output.
PAGE 47
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller Setup Amplifier : X-Over Slope You can choose the crossover filter slope. Select 1- 12 dB/oct: in this case, the Low-pass slope switch on the TH-MXR module will not be active. Select 2- 24 dB/oct: when this option is selected, the Low-pass slope switch on the TH-MXR module will anyway be active, thus providing the ability to mechanically choosing between 12 and 24 dB/oct. For further information see page 23 ÷ 26 a u . m o c .
PAGE 48
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller DUAL POWER & BIAS CONTROL A revolutionary function called Dual Power was introduced for the first time in the HV venti. Controlling the amplifier’s output power configuration, this function allowed the predetermination of the amplifiers output power and of the grade of the outputs operational class.
PAGE 49
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller DUAL POWER Values 850 W Power Output RMS W 850 W a u . m o c . 0 200 W 200 W 3 1 30 mA 10 mA 4 mA 8.5 A Load Impedance Idling Current Consumption 6.2 A 4.3 A 2.2 A 1Ω 1Ω 2Ω 2Ω 2Ω 4Ω 4Ω 4Ω 48 Autogood products internet store http://130.com.
PAGE 50
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller Setup Amplifier: DUAL POWER Settings How to change presets on the Memory (DRC required) The TH due can be set with only one operational mode at a time, while the DRC can manage four customisable memories.
PAGE 51
IN OPTICAL R R 654 901 2 3 50 Autogood products internet store http://130.com.ua 8 7 8 7 654 2 3 2 3 901 654 901 ADRS 8 7 IN OUT REM Front Panel Hi : Lo : PUSH Front Panel Front Panel Rear Panel + RIGHT - SW1 or SW2 mono + LEFT - A Channels WM2 or WT1 12 V - POWER + WM1 or WM2 + CAP WT2 or MT1 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 52
51 Autogood products internet store http://130.com.ua USB / AC Link Converter IN B R R IN OPTICAL L IN B DIGITAL AUDIO L OUT - AD Link - IN R L IN A DC OUT +15 GND -15 R IN A L 654 901 2 3 8 7 8 7 654 2 3 2 3 901 654 901 ADRS 8 7 IN OUT REM Front Panel Hi : Lo : PUSH Front Panel Front Panel 0.3 ÷ 1.2V RMS 1.2 ÷ 4.
PAGE 53
52 Autogood products internet store http://130.com.ua 654 2 3 PRE IN mono PRE IN RIGHT BRIDGE CHAIN MASTER Rear Panel 0 180 PHASE Rear Panel USB / AC Link Converter ACNet (Optional use) 0.3 ÷ 1.2V RMS 1.2 ÷ 4.8V RMS LEVEL TH uno Digital domain Front Panel Hi : Lo : PUSH Front Panel mono SPEAKER Rem IN PRE OUT + SPEAKER A - SS1 SW1 or SW2 + CAP 12 V - POWER + SW1 or SW2 WM1 or WM2 + SPEAKER B a u . m o c .
PAGE 54
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller Status Monitor This feature of the ASC provides the ability to monitor the amplifier working status by moving through the different entries the data regarding the working TH amplifier will show. When displaying a value, if you do not act on any of the buttons for 5 seconds, the ASC automatically goes back to the default display screen. a u . m o c .
PAGE 55
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller Runtime Monitor This function of the ASC provides the ability to alternately show on the amplifier display the information on its operational status. Through this setup you can select the fields you want to be visibile when the amplifier is on. For each field you can select YES to have the entry show on the display. If all NO are selected, the display will always show the default display screen.
PAGE 56
OWNER’S MANUAL / TH uno ASC - Amplifier Status Controller Info and Alert sentences Amp in default 2 Amp in muting 3 Amp in muting 4 Amp off 5 Autoreset 6 Event’s alert 7 Event’s alert 8 Autoreset 9 Event’s alert 10 Autoreset 11 Event’s alert What it means The previously found connection with DRC has been lost. This information is also displayed when the amplifier is on and the DRC gets disconnected. Volume goes back to 0 dB (the set sensitivity is not modified).
PAGE 57
OWNER’S MANUAL / TH uno DRC - Digital Remote Control (not included with TH amplifier) The DRC is a microprocessor digital system providing remote control and monitoring of the TH amplifiers.
PAGE 58
OWNER’S MANUAL / TH uno DRC - Digital Remote Control Info and Alert sentences AMPLIFIER ADDRESS (ADRS) TH AMPLIFIER MODEL a u . m o c . 0 PROTECTION TYPE Service general protection. Call Audison Technical Support. Event’s alert Autoreset Autoreset Event’s alert 3 1 Overload protection. Check speaker load. Clip output is reaching distortion threshold. Thermal protection. Check environmental temperature and/or use a low bias AMC setting. Rare contact with ground occurs.
PAGE 59
OWNER’S MANUAL / TH uno DRC - Digital Remote Control DRC - How to connect a u . m o c . 0 8 7 901 654 2 3 DRC/AC Link cable (provided) DRC - How to install 6 mm / 0.23” 16 mm / 0.63” 17 mm / 0.67” 90 mm / 3.54” 12.5 mm / 0.49” 43.5 mm / 1.71” 13.5 mm / 0.53” External mounting 58 Autogood products internet store http://130.com.ua General 3.5 mm / 0.14” 50 mm / 2” Flush mounting Ø 2 mm / 1/8” 68 mm / 2.68” 35 mm / 1.
PAGE 60
OWNER’S MANUAL / TH uno ACNet - Audison Control Network Software to control Audison amplifier a u . m o c . 0 3 1 8 7 901 654 Digital domain Hardware Requirements: 1024x768 Display Optimized - 96 dpi Font size - 1 x USB port (1.
PAGE 61
ADVANCED MANUAL / ACNet ACNet - Audison Control Network Functions Description 8 10 9 2 6 3 3 1 7 4 1 • SYSTEM DISPLAY: TH amplifiers connected to the system with AC Link will be displayed in this area. If the ADRS are set correctly, this display will show the TH amplifier model name and its ADRS. If more than one amplifier is set on the system with the same ADRS, the software will only show and allow to tune the first one.
PAGE 62
ADVANCED MANUAL / ACNet ACNet - Audison Control Network System Display 8 10 9 2 5 6 3 1 7 a u . m o c . 0 3 1 When installing a system composed by TH amplifiers it’s possible to create a network between them by using AC Link series connection. It‘s necessary that a unique ADRS is given to each amplifier. Each amplifier must have a different ADRS. In this way, when the software is turned on, the system will be able to automatically recognize which amplifier is present in the network.
PAGE 63
ADVANCED MANUAL / ACNet ACNet - Audison Control Network Amplifier Setting: Identification 8 10 9 2 5 6 3 1 7 4 a u . m o c . 0 3 1 The drop-down menu displays the available values to be assigned to the amplifier depending on its configuration / functioning modes. For example, if the amplifier it’s mono set, the available ID will be the specific ones for the mono setting. If the system is also composed by non-TH amplifiers, they can be managed by attributing an ID to the Pre Out connected to them.
PAGE 64
ADVANCED MANUAL / ACNet ACNet - Audison Control Network Amplifier Setting: Inputs 8 10 9 2 5 6 3 1 7 a u . m o c . 0 As for the ASC Setup Amplifier, it is necessary to set the system whenever wanting to use the digital input.
PAGE 65
ADVANCED MANUAL / ACNet ACNet - Audison Control Network Amplifier Setting: Sensitivity and Preout Level 8 10 9 2 5 6 3 1 7 a u . m o c . 0 From this section featuring drop down menus, it is possible to regulate each amplifier’s input sensitivity, acting also on the High/Low Level. There are sliders for each channel which can work singularly or together if “linked”. The software enables the fine tuning between right and left, acting on the corresponding slider.
PAGE 66
ADVANCED MANUAL / ACNet ACNet - Audison Control Network Amplifier Setting: Dual Power Memory 8 10 9 2 5 6 3 1 7 a u . m o c . 0 3 1 In this section the TH amps operating modes memories can be selected. The availabIe preset are: Hi-AB Class (default), Hi-Current, A-Class, Energy Saving. They can be assigned to each single memory by using the drop down menus.
PAGE 67
ADVANCED MANUAL / ACNet ACNet - Audison Control Network System Audio Control 8 10 9 2 5 6 3 1 7 a u . m o c . 0 3 1 These controls act on the whole system: - System Volume: it’s the main volume control of the system, the slider on Min position switches on the muting and shows “MUTE” in the specific box. The adjustment starts from -60 dB (muting) up to 0 dB Max, 0,5 dB steps.
PAGE 68
ADVANCED MANUAL / ACNet ACNet - Audison Control Network Amplifier Status 8 10 9 2 5 6 3 1 7 a u . m o c . 0 3 1 The ACNet software performs a real-time check-up of the amplifiers operating conditions. Once an amplifier is selected, the parameters monitored by the ASC microprocessor are shown on the specific boxes. Bias and Power - User preset: displays the operating modes selected in the Dual Power Setting. For the TH quattro the operating modes of both channels A and B are shown.
PAGE 69
ADVANCED MANUAL / ACNet ACNet - Audison Control Network System Amplitude Setup 8 10 9 2 5 6 3 1 7 a u . m o c . 0 Once each single amplifier in the system has been set, it is possible to use the setup window above, which allows the sensitivity adjustment of all amplifiers of the entire system. Using this section, it’s possible to operate in an even mode on the amplifiers level tuning.
PAGE 70
ADVANCED MANUAL / ACNet ACNet - Audison Control Network System Dual Power Setup 8 10 9 2 5 6 3 1 7 a u . m o c . 0 This setup enables the complete management of the operating mode of the amplifiers in the systems. The chart above presents in one window all the amplifier names and channels being used. The fields are provided by default as in the example above.
PAGE 71
OWNER’S MANUAL / TH uno Technical Specifications Power supply Voltage Idling current: A-Class Hi-AB Class Hi-Current Energy Saving Switched off 11 ÷ 15 VDC 8.5 A 6.2 A 4.3 A 2.2 A 0.04 mA Consumption @ 14.4 VDC, 1 7 Max musical power Remote IN voltage Remote OUT voltage Internal fuse (AFS) 132 A 7 ÷ 15 VDC (1 mA) 12 VDC (50 mA) 150 A a u . m o c .
PAGE 72
a u . m o c . 0 3 1 61 Autogood products internet store http://130.com.