Users Manual
Table Of Contents
- Index
- 1. PRODUCT DESCRIPTION
- 2. PACKAGING CONTENTS
- 3. bit One HD Virtuoso AND DRC MP INSTALLATION
- 4. CONNECTION PANELS - DESCRIPTION
- 5. CONNECTIONS
- 6. bit One HD Virtuoso SOFTWARE AND DRIVERS - INSTALLATION GUIDE
- 7. bit One HD Virtuoso SETUP WITH PC
- 8. bit One HD Virtuoso SETUP USING A PC
- 9. TROUBLESHOOTING
- 10. TECHNICAL SPECIFICATIONS
- 11. ADDENDUM
80
USER'S MANUAL
The semi-automatic procedure continues
requesting the set up of the high volume
listening reference level. Move the Volume
slider to the desired level.
After adjusting the slider, select START.
Move the EQ slider to set up the high volume
response equalization until the desired
sound is achieved. After nding the right
adjustment select SAVE.
At this point the reference curve for high
volume listening will be applied.
Reset Dynamic EQ
During the setup the Reset EQ button
can be selected to reset the applied
modications and restore the default
values.
To conrm the settings and activate the
Dynamic Equalizer while listening click on
the X of the PC software window.
At a later stage, besides being enabled and disabled via PC software, this function can also be enabled/disabled
via DRC MP.
ADVANCED MODE
The equalization curve, in this mode, is not
xed. It must be selected through a parametric
equalizer. The procedure for the setup is the
same as the one previously explained for the
EASY mode with the further possibility to
apply a customized equalization. The image
to the side displays the main window showing
a “customized” equalization.
Reset Dynamic EQ
During the setup the Reset EQ button can be
selected to reset the applied modications
and restore the default values.
To conrm the settings and activate the
Dynamic Equalizer while listening click
on the X of the PC software window
At a later stage, besides being enabled and
disabled via PC software, this function can
also be enabled/disabled via DRC MP.
8