Manual

53
USER'S MANUAL
bit One HD /
To set up the dynamic equalizer click on the button to the right of the menu and proceed as follows:
EASY MODE
Insert a CD in the source and play a reference track.
Select the Easy operating mode. A semi-automatic
procedure will start. Move the Volume slider setting the low
volume listening reference level.
After adjusting the slider, select START.
Move the EQ slider to set up the low volume response
equalization until the desired sound is achieved. In this
case the equalization curve which applied is pre-set. When
reaching the desired setting select SAVE. At this point the
reference curve for low volume listening will be applied.
The semi-automatic procedure continues requesting
the set up of the high volume listening reference level.
Move the Volume slider to the desired level.
After adjusting the slider, select START.
Move the EQ slider to set up the high volume response
equalization until the desired sound is achieved. In this case
the equalization curve which applied is pre-set At this point
the reference curve for high volume listening will be applied.
Reset Dynamic EQ
During the setup the Reset EQ button can be selected to reset
the applied modications and restore the default values.
To conrm the settings and activate the Dynamic Equalizer
while listening click on the X of the PC software window.
At a later stage, besides being enabled and disabled via PC software, this function can also be enabled/disabled
via DRC MP.
8