Manual

42
USER'S MANUAL
bit One HD /
The bit One HD manages the system setup working on Preset
A by default; however, it also offers the possibility to store and
recall eight Presets (A, B, C, D,E,F,G,H).
Pressing the MEMORY button on the main menu you can access
the different functions you can perform on the featured presets.
The following functions are available:
- Load All Presets: it loads all the memories
(A/B/C/D/E/F/G/H)
from a le previously saved (.prs format);
- Save All Presets: it saves all the memories (A/B/C/D/E/F/G/H)
in a le that can be recalled (.prs format);
- Load Current Preset: it loads a memory previously saved
(.pro format) by placing it on the memory you are operating on;
- Save Current Preset: it saves the memory you are operating
on in a le that can be recalled (.pro format);
- Copy Preset From: it provides the ability to copy the content
of one memory into another memory;
- Current Preset Default: it restores the crossover and equalization
default values, that would be suggested at the end of the set
up procedure;
- Enable Memory Overall: it enables the Overall function
which recalls a memory previously saved (see following point),
optimized for a perfect listening from all positions within the
car compartment. This function can be activated through the
terminal, setting the Overall Sel cable to +12V
(see section 8.3.4) ;
- Select Memory Overall: it congures an existing memory as
“Overall”. If an existing memory has been congured with
time delays, these will be reset and the Car Central will be
set up as the listening position
(see section 8.5) . At a later
stage, the settings related to this “Overall” memory can be
modied.
The following data will be stored into the presets:
- the lter settings for each channel;
- the time delay settings for each channel;
- the equalization settings for each output channel;
- the Main EQ settings
(see section 8.9.2) ;
- the Dynamic EQ settings/activation
(see section 8.12.3) ;
- the Bass Boost settings/activation
(see section 8.12.4) ;
- the output levels of each channel;
- listening points markers.
We recommend that you copy the parameters entered in the
preset you are using into the presets that are not being used.
The presets can be recalled through the DRC MP. If some
presets are not stored, they will store the Default settings.
8.4 MEMORY
3
8