Manual
38
USER'S MANUAL
bit One HD /
Selecting the “File” tab a drop-down menu shows up
listing the entries as shown in the image to the right of
this page.
3
FINALIZE to bit One HD: this function enables the loading of
all the parameters selected while conguring the bit One HD
microprocessor internal memory, allowing it to work without being
connected to a PC. When selecting the Finalize to bit One HD
function, the software noties that the data previously saved in the
bit One HD will be overwritten.
- Select YES to load the data saved in the bit One HD, overwriting
the previously saved data, if any.
- Select NO to interrupt the process.
In OFFLINE mode this function allows the user to view the features
previously saved in order to consult them.
WARNING: before disconnecting the bit One HD from the PC or each time that you exit the PC software
after modifying the system conguration, always run the Finalize to bit One HD procedure. If you do not
follow these instructions all the data entered will be lost.
1
Load Setup: by selecting this entry, the bit One HD entire
setup is loaded from a previously saved le
(EX. “BitOnehdCong1.bhd”). This feature is available both
in TARGET and OFFLINE mode. In TARGET mode this
function provides the ability to load again all the settings
that have been previously saved. It is useful if you want
to resume all the settings you have previously selected to
install another bit One HD with the same adjustments, in
order to test different acoustic settings.
2
Save Setup: it enables the storage of the entire bit One HD
conguration in a le (EX. BitOnehdCong1.bhd”) that you
can subsequently load into the bit One HD through the Load
Setup function. This feature is available both in TARGET and
in OFFLINE mode.
8.2 MAIN MENU: “FILE”
1
2
3
4
5
6
7
8
9
10
11
14
12
13
1
8