Manual
34
USER'S MANUAL
bit One HD /
Screen
image
sequence
13. System conguration successfully completed
Stop playing the Test track, remove the supplied Setup CD
from the head unit CD player and then press OK.
7.5
MASTER OPTICAL 1 INPUT SELECTION
1. Auto Input Switch
The automatic volume control for the auxiliary source (Aux - Optical 1)
can be activated through the Head Unit volume control, if it is provided
with an AUX input
(see section 5.4.3 - 5.6.1)
Press BACK to go back to the previous step.
Press NEXT to go ahead with the setup procedure
Press SKIP to bypass the procedure.
Follow the instructions listed below:
- connect the AUX IN inputs of the source (Head Unit) to the bit One HD
RVA input.
- select the source AUX IN input (Head Unit).
- set the source volume to the maximum undistorted level.
Press BACK to go back to the previous step.
Press NEXT to go ahead with the setup procedure.
Press CANCEL to exit the program.
When the procedure is completed:
press BACK to go back to the previous step.
press NEXT to go ahead with the setup procedure.
press CANCEL to exit the program.
1
13
7