Manual

33
USER'S MANUAL
bit One HD /
Screen
image
sequence
10. Selection of passive crossovers for speaker groups
The presence of passive crossovers managing speaker
functional groups in complex systems can be provided by
the user.
E.g.: the 3-way Front can be managed as:
- multi-amplied (6 output channels would be required);
- passive mid-high speakers + separately amplied woofer
(4 output channels would be required);
- 3-way passive (2 output channels would be required).
While performing the setup, the software will automatically notify
the return within the 8 output channel limit, the warning message
will then disappear and the NEXT button will appear.
Press BACK to go back to the previous step.
Press NEXT to go ahead with the setup procedure.
Press CANCEL to exit the program.
11. Processor outputs (Ch1÷Ch13) allocation
The bit One HD features 13 output channels. On this
specic step of the procedure, any signal can be
assigned to each output channel.
12. Selection of the ampliers connected through the
AD Link / AC Link connection system
If the system features ampliers provided with the
AD Link digital input and you want to connect them to
the system, you need to select them on this setup
procedure window.
The CH1-CH8 output channels will be available on the
AD LINK 1 socket, while the CH9-CH13 channels will be
available on the AD LINK 2 socket.
E.g.: the outputs 1 and 2 can be assigned to the rear channels simply
to avoid having to lengthen the cables going to the specic amplier.
For a matter of convenience, if the output 1 is assigned to the
left woofers, the software will automatically assign the output 2
to the right woofers. If during the procedure the output 1 is
assigned also to the left mid-high speakers, the software will
show a warning message. Change the allocation of one of the two
numbers marked in red and the software will automatically select
the rst available channel.
Press BACK to go back to the previous step.
Press NEXT to go ahead with the setup procedure.
Press CANCEL to exit the program.
Remark: remember to assign the corresponding Amp ID to the specic
amplier. The bit One HD will automatically recognize the identied
amplier.
10
11
12
7