Manual

31
USER'S MANUAL
bit One HD /
7. Master Input Delay
The presence of time delays on the inputs of the Head Unit interfaced
to the bit One HD can be veried.
Press BACK to go back to the previous step.
Press NEXT to go ahead with the setup procedure.
Press SKIP to exit the program.
Follow the instructions listed below:
- play track 3 (press Play);
- set all tone controls to zero (0);
- set balance and fader to center (0);
- do not change the volume level previously set through the inputs
level automatic calibration;
Press BACK to go back to the previous step.
Press NEXT to go ahead with the setup procedure.
Press CANCEL to exit the program
A progress bar and specic messages show the procedure’s
implementation.
Once the procedure is completed, the window will show the message:
A) Master Delay compensation is not necessary: the source has no
pre-set time delays;
Press BACK to go back to the previous step.
Press NEXT to go ahead with the setup procedure.
Press CANCEL to exit the program.
B) Master Delay compensation is necessary: the source has pre-set
time delays. Tick the ENABLE box if you wish to align the time delays
to 0 in the system setup.
Press BACK to go back to the previous step.
Press NEXT to go ahead with the setup procedure.
Press CANCEL to exit the program
7
7